You can also install your SeaSmart anywhere the inlet sanitation hose is accessible between the inlet seacock and the flush pump. There’s full instructions on how to do this with every SeaSmart and you will need a straight connector (double hose tail), these are available in our online shop or at…
The very thin catheter like sanitiser tube has to be threaded down inside the inlet sanitation hose to within 15 cms (6 inches) of the seacock. SeaSmarts come with a 1.8 metre (6ft) length which you cut to length with scissors. If your inlet sanitation hose is longer than 1.8…
You’ll need a SeaSmart for each marine toilet on the boat.
Height: 26cm or 10 inchesWidth: 11.6cm or 4½ inchesDepth: 7cm or 2¾ inches
From us or your local chandler. We dispatch replacement refills all over the world. You can order them on this Website, by phone on +44 (0)1202 823699, by email or by clicking here
That depends on usage, but usually long enough to power 1 or 2 refills. A discrete LED indicator tells you when the battery needs changing.You must use good quality Alkaline PP3 batteries.
That depends on usage. As a rough guide, on a boat with average use, it should last about a year, on a boat with good use about 6 to 12 months. On a boat sailing continuously with a crew of 4 using one head a refill should last about 2…
None! The SeaSmart is powered by its own small 9 volt PP3 Alkaline battery, which powers its microprocessor, pumping system and all electronics.
It’s easy if you can DIY or know someone who can. Just 2 tiny screws (or sticky pads) secure the SeaSmart by the Head and then it connects to the inlet sanitation hose of the pump (manual or electric). All you need are basic DIY tools. Full instructions come with…
20th February 2025
We are delighted to announce that we have been award a Certificate of Excellence from Canals Online Magazine! We pride ourselves in our high standards of Customer Service and Satisfaction but it is always lovely when we are recognised for it! We believe that you should receive the same levels…
